How to Create a windows 10 bootable install usb

Download Rufus here: https://rufus.ie/en/

You will need this for the bootable usb creation.

Download Windows 10 iso image here: https://drive.google.com/file/d/11QHxK857uAcAms602_e9h9a9xVezJv5Q/view?usp=sharing

Select your desired usb flash drive on the (Device) section.

 Click on the select button in the (Boot selection) section.

Select your Windows 10 ISO image here and click (Open)

On the (Image option) section select (Standard Windows installation)

If your computer has UEFI you can select (GPT) in the (Partition scheme) section.

If your not sure if you have UEFI then select (MBR), Same applies if you don't have UEFI.

Now you can click (START)

Rufus will now start formatting your partition and create the bootable media.

This process will usually take a few minutes but this depends on your computer's speed.

Now your usb will be ready and you can remove it from your computer and plug it in to your desired computer.

Once you plug the usb in and start up your desired computer

open the bios by pressing (f10) (f8) (f11) upon startup

The key is different for some manufactures but the most common one is (f10)

Once you're in the bios disable secure boot and enable usb boot note: not all bios utility's have this